John Deere 7R 350 Tractor Problems: (Causes and Solution)

John Deere 7R 350 Tractor Problems can be a major inconvenience for owners, causing frustration and loss of productivity. This guide will help you quickly diagnose and resolve the issue so you can get back to work.

We will walk you through the steps to troubleshoot the problem, starting with a visual inspection of the tractor. We will then discuss common causes of the problem and how to fix them. By the end of this guide, you will have the knowledge and tools you need to resolve John Deere 7R 350 Tractor Problems quickly and easily.

Most common Problems of John Deere 7R 350 Tractor

Most Common Problems of John Deere 7R 350 Tractor

Engine Problems

Engine won’t start: This can be caused by a number of factors, including a dead battery, a faulty starter, or a problem with the fuel system.
Engine misfires: This can be caused by a number of factors, including a bad spark plug, a faulty ignition coil, or a problem with the fuel system.
Engine runs rough: This can be caused by a number of factors, including a dirty air filter, a faulty fuel injector, or a problem with the engine’s computer.
Engine overheats: This can be caused by a number of factors, including a faulty radiator, a clogged cooling fan, or a problem with the thermostat.

Transmission Problems

Transmission won’t shift: This can be caused by a number of factors, including a faulty transmission control module, a problem with the shift linkage, or a problem with the transmission fluid.
Transmission slips: This can be caused by a number of factors, including a worn clutch, a faulty torque converter, or a problem with the transmission fluid.
Transmission makes noise: This can be caused by a number of factors, including worn gears, a faulty synchronizer, or a problem with the transmission fluid.

Hydraulic Problems

Hydraulics won’t work: This can be caused by a number of factors, including a faulty hydraulic pump, a problem with the hydraulic lines, or a problem with the hydraulic reservoir.
Hydraulics leak: This can be caused by a number of factors, including a worn seal, a faulty hose, or a problem with the hydraulic reservoir.
Hydraulics make noise: This can be caused by a number of factors, including worn gears, a faulty pump, or a problem with the hydraulic lines.

Other Problems

Electrical problems: This can be caused by a number of factors, including a faulty alternator, a bad battery, or a problem with the wiring harness.
Brake problems: This can be caused by a number of factors, including a worn brake pad, a faulty brake caliper, or a problem with the brake fluid.
Tire problems: This can be caused by a number of factors, including a flat tire, a faulty tire pressure sensor, or a problem with the wheel alignment.

How to Troubleshoot John Deere 7R 350 Tractor Problems

Step 1: Check the Engine

The engine is the heart of your tractor, so it’s important to troubleshoot any problems that may arise. Here are a few things to check:

Check the oil level. The oil level should be between the full and add marks on the dipstick. If the oil level is low, add oil until it reaches the full mark.
Check the oil pressure. The oil pressure should be between 25 and 50 psi at idle and between 40 and 60 psi at operating speed. If the oil pressure is low, you may have a problem with the oil pump, oil filter, or oil lines.
Check the coolant level. The coolant level should be between the full and add marks on the overflow tank. If the coolant level is low, add coolant until it reaches the full mark.
Check the coolant temperature. The coolant temperature should be between 195 and 220 degrees Fahrenheit. If the coolant temperature is too high, you may have a problem with the cooling fan, radiator, or thermostat.
Check the spark plugs. The spark plugs should be clean and free of deposits. If the spark plugs are dirty, they may not be firing properly, which can cause the engine to misfire or run rough.
Check the fuel filter. The fuel filter should be clean and free of debris. If the fuel filter is dirty, it can restrict the flow of fuel to the engine, which can cause the engine to run rough or stall.

Step 2: Check the Transmission

The transmission is responsible for transferring power from the engine to the wheels. Here are a few things to check:

Check the fluid level. The transmission fluid level should be between the full and add marks on the dipstick. If the fluid level is low, add fluid until it reaches the full mark.
Check the fluid condition. The transmission fluid should be clean and free of debris. If the fluid is dirty, it may be contaminated with metal shavings or other debris, which can damage the transmission.
Check the transmission operation. The transmission should shift smoothly between gears. If the transmission is not shifting smoothly, you may have a problem with the transmission fluid, the transmission bands, or the transmission clutch.

Step 3: Check the Electrical System

The electrical system is responsible for powering the tractor’s lights, gauges, and other accessories. Here are a few things to check:

Check the battery terminals. The battery terminals should be clean and free of corrosion. If the battery terminals are corroded, they can cause the battery to lose power, which can lead to problems with the electrical system.
Check the battery voltage. The battery voltage should be between 12 and 14 volts. If the battery voltage is too low, the tractor may not start or run properly.
Check the alternator. The alternator is responsible for charging the battery. The alternator should be producing between 13 and 14 volts. If the alternator is not producing enough voltage, the battery will not charge properly, which can lead to problems with the electrical system.
Check the fuses. The fuses protect the electrical system from damage. If a fuse blows, it indicates that there is a problem with the electrical system. Check the fuse box to see which fuse has blown and replace it with a new fuse.

Step 4: Check the Hydraulic System

The hydraulic system is responsible for powering the tractor’s implements. Here are a few things to check:

Check the fluid level. The hydraulic fluid level should be between the full and add marks on the dipstick. If the fluid level is low, add fluid until it reaches the full mark.
Check the fluid condition. The hydraulic fluid should be clean and free of debris. If the fluid is dirty, it may be contaminated with metal shavings or other debris, which can damage the hydraulic system.
Check the hydraulic operation. The hydraulic system should operate smoothly and without any leaks. If the hydraulic system is not operating smoothly, you may have a problem with the hydraulic pump, the hydraulic lines, or the hydraulic valves.

Step 5: Check the Brakes

The brakes are important for safety, so it’s important to troubleshoot any problems that may arise. Here

How to Prevent John Deere 7R 350 Tractor Problems

How to Prevent John Deere 7R 350 Tractor Problems

The John Deere 7R 350 is a powerful and versatile tractor that can be used for a variety of tasks, from farming to construction. However, like any piece of machinery, it is important to take steps to prevent problems from occurring. By following these tips, you can help keep your John Deere 7R 350 running smoothly for years to come.

1. Maintain the tractor regularly.

The most important step you can take to prevent problems with your John Deere 7R 350 is to maintain it regularly. This includes changing the oil and filters, checking the fluids, and inspecting the belts and hoses. By following the maintenance schedule in your owner’s manual, you can help catch problems early and prevent them from becoming major repairs.

2. Use the right fuel.

Using the wrong fuel can damage your John Deere 7R 350’s engine. Make sure to use the type of fuel specified in your owner’s manual. If you are unsure what type of fuel to use, contact your John Deere dealer.

3. Avoid overloading the tractor.

Overloading the tractor can put stress on the engine and other components, leading to premature wear and tear. Make sure to load the tractor according to the manufacturer’s specifications.

4. Drive the tractor safely.

Reckless driving can damage your John Deere 7R 350. Avoid sudden starts and stops, and be careful when driving on rough terrain.

5. Store the tractor properly.

When storing your John Deere 7R 350 for an extended period of time, it is important to protect it from the elements. Cover the tractor with a tarp or cover, and make sure it is in a well-ventilated area.

By following these tips, you can help prevent problems with your John Deere 7R 350 and keep it running smoothly for years to come.

Additional tips:

Keep the tractor clean. Dirt and debris can build up on the tractor and cause problems. Wash the tractor regularly and keep the cab clean.
Inspect the tractor regularly. Look for signs of wear and tear, such as leaks, loose bolts, and damaged hoses. Repair any problems as soon as possible.
Use the right attachments. Using the wrong attachments can damage the tractor. Make sure to use attachments that are compatible with your tractor.
Get regular service. Having your tractor serviced regularly can help catch problems early and prevent them from becoming major repairs.

By following these tips, you can help keep your John Deere 7R 350 running smoothly for years to come.

Conclusion

In conclusion, the John Deere 7R 350 tractor is a powerful and capable machine that can handle a variety of tasks. However, it is important to be aware of the potential problems that can occur with this tractor, such as transmission issues and DEF injector problems. By being aware of these potential problems, you can be prepared to deal with them if they arise. Overall, the John Deere 7R 350 is a good tractor that is worth considering if you are in the market for a new tractor.

Leave a Comment